矩形顶管关键技术研究现状及发展趋势探讨

首先，对矩形顶管技术的发展历程及其国内外研究现状进行综述，介绍当前矩形顶管技术主要的应用场景，并结合顶推力预测、注浆减阻、背土效应演化机制和控制对策、顶进过程中的地层响应模式和沉降计算、工作面稳定性评估等关键技术问题，对矩形顶管的理论研究进展进行回顾和讨论。其次，根据矩形断面掘进机的结构形式和切削方式，对国内外矩形顶管掘进机的开发现状及其分类进行介绍。最后，归纳当前矩形顶管在装备及工程应用领域面临的技术挑战，探讨矩形顶管技术的发展趋势，对矩形顶管装备智能化，矩形曲线顶进，长距离、大断面及复合地层等复杂场景下的矩形顶管技术进行展望。     

京杭运河穿黄及黄河北航道走向探析

近年来,京杭运河黄河以北段复航呼声越来越高,京杭运河穿黄及黄河北山东段走向成为目前需要迫切解决的问题。本文通过对东平湖周边防洪工程现状分析,提出了穿黄位置、穿黄方案及穿黄线路走向;根据黄河北河系水网布置,提出了京杭运河黄河北山东段航道初步走向,为京杭运河黄河以北段复航工程提供技术参考。     

Online channel strategies under different offline channel power structures for the Belt and Road of China

ABSTRACT

This paper explores the online channel strategies adopted by Chinese manufacturers with regard to the Belt and Road. It also investigates the effect of offline channel power structures and maritime transportation costs on online channel mode selection and pricing strategies. The offline channel power structures are classified into three types, namely, Chinese manufacturer Stackelberg (MS) structure, vertical Nash (VN) structure, and foreign retailer Stackelberg (RS) structure. Furthermore, a game model is developed among the Chinese manufacturer, foreign retailer, and cross-border e-tailer to investigate the interactions among offline channel power structures, maritime transportation costs, and Chinese manufacturers’ online channel mode selection. The results show that Chinese manufacturers’ preferences for the online agency selling mode increases correspondingly with the decrease in their market position and bargaining power. Moreover, foreign retailers can obtain higher profits in the online agency selling mode under the VN structure. However, the level of profit for foreign retailers depends on the intensity of their competition with cross-border e-tailers under the MS and RS structures. Finally, consumers in countries along the Belt and Road can obtain a higher surplus in the online agency selling mode under all of the structures.     

三峡工程下游引航道通航水流条件试验

三峡工程枢纽泄洪产生水面波动和船闸泄水产生非恒定流,对下游引航道通航条件,尤其是对升船机的运行构成影响。泄洪在口门区及连接段产生的斜流对通航的影响很大,采用斜流的特征值并结合船模航行的斜流效应特征值,有效地分析了口门区及连接段的通航水流条件。采取修改航线措施对改善斜流影响有一定的效果。     

自激多谐继电器稳定可靠性的提高措施

针对闪光器普遍存在闪频不稳的现象，分类叙述影响自激多谐继电器闪频的因素，并提出提高其稳定可靠性的具体措施。     

坞式舰船压载系统研究

对坞式舰船压载系统设计中需考虑的稳性、作业时间、注排水方式等问题进行了分析研究,可供有关设计人员参考.     

温州乐清湾港区试挖槽监测分析

乐清湾避风条件好,潮流动力强,含沙量小,具有较好的建港条件。介绍了乐清湾试挖槽情况,对试挖槽进行了监测分析,指出数据分析表明试挖槽基本处于冲淤阶段,乐清湾港池开挖实行浅水深用的开发方案是可行的。     

Determination of Critical Slip Surface of Soil Slope

A new complex method is presented considering not only the improvement upon the ＂bad ＂design point, but also the diversity of the newly generated complex, which is obtained by replacing the ＂bad ＂design point with the better design point located at the line between the ＂bad ＂design point and the ceotroid of the remaining design points of the old complex. The new complex method is applied to searching for the critical slip surface of two non-homogeneous soil slopes. The comparison of the results obtained by the new complex method with that by the basic complex method shows that the new complex method is much more likely to find the true critical surface for the randomly generated initial complex.     

带中间渠道船闸运转方式的试验研究

带中间渠道的分散梯级船闸是高坝通航建筑物的布置型式之一,它具有调度灵活、通过能力大等特点。但其上下级船闸采用不同运转方式时,所产生的非恒定流水流条件十分复杂,严重时将影响船舶(队)停泊和航行条件,还会对船闸运转及人字闸门产生不利影响。通过1:40的水工概化模型试验,对断面为规则的矩形中间渠道进行了上下级船闸单独、同时与错时灌泄水3种运转方式渠道内的水力特性研究,否定了船闸同时运转方式;对渠长2 000 m和1 400 m在特定条件下的船闸错时运转方式,找出了最佳错开时间;对3种运转方式的水力要素进行综合对比后,最终推荐采用先泄后灌运转方式。     

GTM的压实原理及设计指标与路用性能的相关性分析

GTM的设计思路提出解决目前汽车触地压强不断上升的途径,应用GTM减少沥青路面在重载交通下出现车辙、推移等剪切破坏.试验证明,沥青路面的表现与GTM的设计指标存在良好的相关性,因此GTM具有很好的推广价值.